Quick Answer
Calculate Lane Group Degree of Saturation (v/s) per HCM 6th Edition
Calculator
Need Equipment or a Supplier for This Project?
Use your calculation result to continue with equipment selection, supplier discovery, engineering support, or project evaluation.
Find Engineering Solutions →Result Interpretation
Lane Group Degree of Saturation (v/s) per HCM 6th Edition calculator computes Degree of saturation (v/s) in dimensionless using the defined engineering formula and the input values provided. Degree of saturation (v/s) is expressed in dimensionless. No universal acceptance threshold is defined by this calculator.
Worked Example
Verified calculation
Given:
- Adjusted demand flow rate = 900
- Adjusted saturation flow rate = 1800
Expected Result:
- Degree of saturation (v/s) = 0.5
Engineering Interpretation:
Under the given input conditions, the calculated result is: Degree of saturation (v/s) = 0.5 dimensionless.
The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from deterministically validated test cases.
Formula / Method
v/s = adjusted demand flow rate / adjusted saturation flow rateFormula family: formula_traffic_lane_group_degree_of_saturation_vs_calculator_hcm_6th_ed
Variables
| Symbol | Label | Role | Description |
|---|---|---|---|
| v_c | Adjusted demand flow rate | INPUT | Adjusted demand flow rate |
| s_c | Adjusted saturation flow rate | INPUT | Adjusted saturation flow rate |
| degree_of_saturation | Degree of saturation (v/s) | OUTPUT | Degree of saturation (v/s) |
Calculation Steps
- Enter the adjusted demand flow rate in veh/h.
- Enter the adjusted saturation flow rate in veh/h.
- Step 1: Compute degree of saturation (v/s).
- Read the degree of saturation (v/s) (dimensionless) from the results.
Engineering Summary
Calculate Lane Group Degree of Saturation (v/s) per HCM 6th Edition
Frequently Asked Questions
What does this calculator calculate?
The Lane Group Degree of Saturation (v/s) per HCM 6th Edition calculator estimates Degree of saturation (v/s) based on the input parameters you provide
Why is adjusted demand flow rate important in this calculation?
adjusted demand flow rate is directly proportional to degree of saturation (v/s). When you enter adjusted demand flow rate in veh/h, the calculator uses it in the engineering formula to compute the output
How should I interpret the result degree of saturation (v/s)?
The calculator outputs degree of saturation (v/s) in dimensionless. The result is computed directly from the input values using the defined engineering formula
What units should I use for the inputs?
Enter each value in the units shown next to the input field: Adjusted demand flow rate (veh/h), Adjusted saturation flow rate (veh/h). Make sure all inputs use the specified units for consistent results
What assumptions does this calculator use?
This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment
Related Tools
AASHTO/ITE Pedestrian Clearance Time Validator calculator
HCM 6th Ed. Roundabout Entry Capacity Deficiency Ratio Calculator
Saturation Flow Rate Adjustment for Heavy-Vehicle Mix Calculator
Conflict-Based Occlusion Probability Model for Multi-Modal Intersection Video Detection Calculator
Corridor Progression Bandwidth Utilization Ratio Calculator
Cycle Length Sensitivity Index for Oversaturated Signalized Corridors Calculator
Browse More Tools
Explore the full index of engineering calculators on this vertical site.